Universal Clamp
A traditional bean flange clamp which fastens most lightweight alloy beams together.
Finishes available:
Zinc coated with chrome passivation
Toe Board Clip Securely clips a toe board to a standard (upright). Nail holes allow the board to be firmly held in place.
Finishes available:
Zinc coated with chrome passivation
Toe Board Clamp MK2
A version of our 38mm toe board clamp with a recessed wing nut fastener ensuring that no part protrudes into the walkway.
Available In the following sizes:
1 1/2" (38mm)
Toe Board Clamp
For fast and economical retention of toe boards.
Available In the following sizes:
1 1/2" (38mm)
2 1/2" (63.5mm)
Lynchloc Coupler Used in pairs to fix a barrier between the walls of a lift shaft or stairway entrance.
Finishes available:
Zinc coated with chrome passivation
Ladder Clamp Safely and securely clamps a ladder to a scaffold tube. Used in pairs to ensure that a ladder cannot slip or lean.
Gin Wheel
Used to assist in the loading of supplies and equipment onto a scaffold.
A non-adjustable base plate used to distribute the load of a scaffolding installation.
Size: 150mm x 150mm Thicknesses:
3mm or
5mm Finishes available:
Zinc coated with chrome passivation
Adjustable Baseplate
An adjustable base plate used to distribute the load of a scaffolding installation.
Size: 150mm x 150mm Heights:152mm or
305mm
Reveal Bolt
Used to give adjustment to the ends of scaffold tubes.
Nut Splitter
Essential for maintenance. Seized nuts are easily removed. The high tensile steel bolt drives the alloy steel head into the nut, splitting it to reveal the bolt intact.
Adjustable Aluminium Loading Bay Gates
The Adjustable Loding Bay Gates come in three parts and have no loose fittings which enables speed of erection and dismantling when on site.
Glavanised Loading Bay Gates are also available
Rubbish Chutes
Foot Plate
Aluminium Laddder Access Gate
The Aluminium Laddder Access Gate is a simple solution for safe access and egress from external ladder access to a working platform
Sleeving
Trestles
Stable, lightweight and strong for a uniform safe working load of 460kg to BS1139 Part 4 1982.
Finish: painted
Size No.
Weight
Height Closed
Height Extended
1
7.5kg
0.51m
0.71m
2
9.5kg
0.76m
1.17m
3
10.5kg
1.07m
1.68m
Fitting Caps
Tube End Caps
Debris Netting
Flexi-Ties
Scaffold Sheeting
Scaffolding Tools
12 point Spanner
High quality single-ended swivel socket with 12 points for location on the nut as opposed to the standard 6 to allow for easier, faster and more secure use.
Finishes available:
Zinc Plated. Available in the following sizes:
1/2"
7/16"
Swivel Socket
A spanner with a double-ended socket, 1/2" one end and 7/16" the other, which freely rotates in the drop forged stirrup handle. Ideal where both sizes are widely used.
Finishes available:
Zinc Plated.
Slim Handle Standard Single Ended Socket
A high quality single-ended scaffolding socket spanner with a slimmer handle than the standard spanner below.
Finishes available:
Zinc Plated. Available In the following sizes:
1 1/2" (38mm)
2 1/2" (63.5mm)
Standard Single Ended Socket
A high quality single-ended standard scaffolding socket spanner. The large diameter handle provides a firm grip.
Finishes available:
Zinc Plated. Available In the following sizes:
1 1/2" (38mm)
2 1/2" (63.5mm)
Self Closing Handrail Coupler
Provides a convenient and safe self closing gateway using standard scaffold tube.
Finishes available:
Zinc coated with chrome passivation
Scaffolding Key
For use on eye bolts and any loop fixing. Both ends are case-hardened for additional strength.
Finishes available:
Zinc Plated.
Heavy Duty Single End Socket Spanner
A top of the range spanner with a socket head of alloy steel. The socket and profiled handle are connected with a high tensile fastener to allow replacement of head or handle.
Finishes available:
Zinc Plated. Available In the following sizes:
1/2"
7/16"
Scaffold Hammer & Podger
With a substantial balanced solid steel head at one end and a tapered podger end at the other, this tool is specially designed for use on system scaffolds.
Finishes available:
Zinc Plated.
Double Ended Socket
A spanner with both 1/2" and 7/16" sockets which smoothly swivel on the large diameter steel handle.
Finishes available:
Zinc Plated.
Combo Socket Spanner/PodgerHammer
A socket at one end and a forged square tapered podger at the other for use with eye bolts.
Finishes available:
Zinc Plated. Available in the following sizes:
1/2"
7/16"
